ClicK Parts
ClicK Designs
Click Structures
Photo Gallery
How to Order
Contact us
News

Design Types:

Tower cases
TGL - fully glazed
TGF - with fascia
TSB - storage base
TSF - storage base & fascia
TPB - panelled base
TPF - panelled base & fascia

Display counters
CGL - fully glazed
CPB - panelled base
CSB - storage base
CSD - storage / display base
COB - open base
CAS - angled, storage / display base
CAG - angled, fully glazed
TIL - till unit with base shelf

Wall-mounted cases
WAL - glass top
WAF - with fascia

Mushroom units
MUS - fully glazed top with recessed base

Case shelving

Lighting

Fully-glazed display counter

Cantilever shelving. The A-suffix variant has intermediate posts in the rear face to support cantilever shelving. The posts are inset 200mm from the sides.

• SQ CGL12A - 1200mm wide
• SQ CGL15A - 1500mm wide

Rolling doors. The B-suffix variant has full-width rolling doors and no cantilever shelving.

• SQ CGL09B - 900mm wide
• SQ CGL12B - 1200mm wide
• SQ CGL15B - 1500mm wide

Hinged doors. The 600mm-wide version has a single hinged door instead of sliding ones; so does the 900mm-wide A-suffix model with cantilever shelving.

• SQ CGL06B - 600mm wide
• SQ CGL09A - 900mm wide

Design Type - CGL

This design uses a fully-glazed counter-height Quadrant frame with no horizontal subdivisions.

There are two principal variants - one with cantilever shelving (suffix A) and one without (suffix B).

Rolling doors are fitted to the rear of all models, except for the 600mm one, and the A-suffix version of the 900mm wide one: these are fitted with a single hinged door. All doors are lockable.

The only dimensional difference between the models is the width: all units are 600mm deep and 900mm high. The height breakdown on the left shows (starting from the top) frame height, glass height, and distance from bottom of glass to floor.

Simple dimensional or other detail variations can generally be made without additional cost: please ask for advice if the standard specifications do not fit your needs.

.